3D without 3D TV?

[DJ-Daz]

No 3D? No Problem!
Play 3D movies, games, satellite/cable, and internet videos on any HDTV/Projector/Dual Projector or Monitor!

3Dfury allows you to view 3D content from your PS3, Blu-ray player, satellite/cable or internet on all standard 50/60Hz or 100/120Hz HD displays with either Digital or Analog inputs or both at the same time !

If your HDTV or projector can play regular non-3D games and Blu-ray movies then the 3Dfury will work for you! It turns your existing HDTV or projector into a 3D home theater!

If your HDTV or projector cannot play HDMI content because it lacks of a HDMI input, 3Dfury can still turn it into a 3D home theater, thanx to embedded HDMI converter based on HDfury technology.

Upgrade to 3D and HDMI at a fraction of the cost of buying a new display!

The 3Dfury supports every 3D signal type in existence today including frame-packing, side-by-side, top-bottom. It is firmware updatable so that new features can be added in the future as needed!

Start watching Blu-ray movies like Tron: Legacy 3D and Despicable Me 3D as well as sports and movies on ESPN 3D and SKY 3D and see what you’ve been missing!

In addition to supporting all standard 50/60Hz displays in either analog or digital (HDMI, DVI-D, RGBHV, component), the 3Dfury also supports any 100/120hz 3D Ready DLP-Link projector by brands like Optoma, Benq, Viewsonic, etc.

How difficult is it to set up?

A few dip switchs on the 3Dfury must be set once depending on whether your TV is a 50/60Hz or 100/120Hz model or if it takes Digital DVI-D/HDMI or either RGBHV or component as input. No other setup is required.
For more information download the User Manual on http://www.3Dfury.com main page.

3Dfury is 100% plug-n-play with automatic recognition of 3D mode*
2D video just passes through the 3Dfury without any modifications (except for advanced double/triple frame mode). Just connect the 3Dfury between the source and the TV/projector. That’s it!

PS3 users need to make sure to have the latest firmware installed and go to Settings -> Display settings -> Video Output and select “automatic” so that 3D output is enabled. After that you just launch the game and that’s it - 3Dfury will take care of rest.

* Some sources may not cause the 3Dfury to autoswitch to the right 3D mode as the information is missing. In this case you can force 3Dfury to the right 3D mode.

Which projectors and TVs are supported?

Any standard 50/60Hz or 100/120Hz displays will work with 3Dfury.
3Dfury is the world first solution that work with either Digital (DVI-D/HDMI) or Analog (RGBHV/component) displays as well as ultimate Dual Projectors setup !

Which 3D glasses are right for me?

Passive glasses are only suitable for Dual projectors setup. For any others setup, Active Shutter glasses are requiered.
We recommend the Radio Frequency (RF) Active Shutter glasses as they are universal and work with all display types.
If you have a DLP HDTV/projector that supports 100Hz or 120Hz, the DLP-Link Active Shutter glasses can also be used.
All glasses work with 3Dfury (However they must be carefully selected for your display)

Detailed information:

OK: DLP-Link Active Shutter glasses: For use with 100/120Hz DLP HDTVs/projectors only. They do not work with standard 50/60Hz HDTVs/projectors or non DLP displays. No emitter is required. The glasses link to the DLP projector without any sort of special emitter or 3rd party transmission device. Not adjustable/configurable. Note that DLP Link glasses only work with DLP displays so if you upgrade or change your display to a non-DLP model, these glasses will no longer work. For this reason we recommend RF glasses.

NOT RECOMMENDED: Infrared (IR) Active Shutter glasses: For use with all HDTVs/projectors (50/60Hz or 120Hz).
One emitter is required and can control multiple IR glasses. Infrared is directional and is therefore affected by line-of-sight interference (the IR glasses must at all times be able to ‘see’ the emitter). Standing up, turning your head, or just leaning forward to pick up your drink is often enough to cause the IR sync to be lost. Infrared can also be affected by IR remote controls, florescent lights and sunlight. We do not recommend IR glasses in most situations for these reasons.

BEST: Radio Frequency (RF) Active Shutter glasses: For use with all HDTVs/projectors (50/60Hz or 100/120Hz). One RF emitter is required and can control multiple RF glasses. Unlike IR glasses they are completely immune to interference. These are universal glasses that work on any manufacturer’s 3D TV as well as our 3D converters. We highly recommend that these glasses be used regardless of the type of TV or converter you purchase. They are completely adjustable/configurable. To ensure highest possible compatibility please look for glasses with adjustable delay, offset, duty_cycle and sync inverter. Our 3D glasses offer all possible configurations including presets directly on the Glasses themself so you can tune them up perfectly without having to stand up from the couch. We designed and offer the worldwide first glasses that can operate from 60 to 144hz.










3Dfury Highlight Features:

Add 3D to ANY TV, Monitor, Proj (even 60hz TV !)
Display HDMI content on Digital and/or Analog display
3Dfury can output in both Digital and Analog Video/Audio simultaneously !
Therefor acting as an advanced digital/analog splitter.
Double and Triple frame 1080p24 material up to 1080p72
3D mode output up to 720p144
Dual projectors setup using two 3Dfury modules and passive glasses.
7.1 Dolby® True HD & DTS Master Audio
Input: HDMI 1.4 (HDCP compliant) input with 3D and Deep Colour support
Output: Digital HDMI / DVI-D and/or Component (YPbPr/YCbCr) and VGA (RGBHV) video output
All modes autodetected if possible, otherwise can be forced via button
3-pin mini-DIN Sync Out (for optional emitter)
Customisation settings available through DIP SWITCH and buttons
Perfectly and automatically center image in all standard NTSC/PAL component modes
Manually adjust horizontal screen position in all NTSC/PAL RGBHV modes
Performs Colour Depth Upscaling in all modes (ON/OFF user selectable)
Horizontal and Vertical Sync Polarity Inverter included
Automatic SD/HD color-space selection
Accept third party accessories on its output
Improved output cable driver for driving long cable runs (40-50′)
Software/Firmware upgradeable through USB
Sound output:
Analog and Digital Optical (S/PDIF 5.1 Dolby/DTS) through an innovative 3.5mm combo jack and 7.1 DTS-MA & Dolby True HD via HDMI output
HDMI audio passthrough

3Dfury Input/Output mode:

2D VIDEO MODE COMPATIBILITY:
NTSC 480i/p, PAL 576i/p, HDTV 720p/1080i/1080p
2D OUTPUT:
2D movies: 1080p24, 1080p48, 1080p72 (3Dfury can double and triple frame from 24hz material)
720p60, 720p120 (double frame from 720p60: currently under dev. ready for release date or later firmware update)
Passthrough any resolution
3D MODES INPUT COMPATIBILITY:
Full 3D HD 1080 (per HDMI) (Blu-ray): 1920 x 2205 24Hz
Full 3D HD 720 (per HDMI) (Blu-ray): 1280 x 1470 60Hz
Top/Bottom 1080p 24Hz: 1920 x 1080
Top/Bottom 1080p 25Hz: 1920 x 1080
Top/Bottom 1080p 30Hz: 1920 x 1080
Top/Bottom 1080p 50Hz: 1920 x 1080
Top/Bottom 1080p 60Hz: 1920 x 1080
Top/Bottom 1080i 50Hz: 1920 x 1080
Top/Bottom 1080i 60Hz: 1920 x 1080
Top/Bottom 720p 30Hz: 1280 x 720
Top/Bottom 720p 50Hz: 1280 x 720
Top/Bottom 720p 60Hz: 1280 x 720
Side-by-Side 1080p 24Hz: 1920 x 1080
Side-by-Side 1080p 30Hz: 1920 x 1080
Side-by-Side 1080p 50Hz: 1920 x 1080
Side-by-Side 1080p 60Hz: 1920 x 1080
Side-by-Side 1080i 50Hz: 1920 x 1080
Side-by-Side 1080i 60Hz: 1920 x 1080
Side-by-Side 720p 50Hz: 1280 x 720
Side-by-Side 720p 60Hz: 1280 x 720
Frame packed 720p 30Hz: 1280 x 720
Frame packed 720p 50Hz: 1280 x 720
Frame packed 720p 60Hz: 1280 x 720
Frame packed 1080p 24Hz: 1920 x 1080
Frame packed 1080p 25Hz: 1920 x 1080
Frame packed 1080p 30Hz: 1920 x 1080
3D OUTPUT:
720p60, 720p72, 720p96, 720p120, 720p144 Frame Sequential
720p and/or 1080p for 60hz display
1080p60, 1080p72 (in dev)

3Dfury Specifications:

Input: 1 x HDMI v1.4 (DVI 1.0 compatible)
12-bit deep color HDMI native support
Output: Digital HDMI / DVI-D and/or VGA FEMALE output connector, 10 bit analog resolution.
HDCP supported (Integrated HDCP decipher engine, Pre-programmed HDCP key)
Horizontal shift capability for RGB output mode
Enabled with a dip-switch, applied with push-buttons
Output horizontal and vertical sync polarity selector for RGB modes (dip switch)
Digital Output format: Either HDMI or DVI-D
Analog Output format: Either RGB or YPbPr, dip-switch selectable
YPbPr requires VGA->3RCA breakout cable
All HD/SDTV formats from 1080p down to 480i, NTSC and PAL
Including 1080p @ 72Hz PAL and NTSC (for RGB output only)
Including 1080p @ 24Hz PAL and NTSC
11-bit 225MHz DAC processing (for true 10-bit analog output)
Two separate Internal EDID EEPROM with complete CEA861 extension block
Dip-switch selectable
One EDID supports all formats
The other EDID is up to 1080i, and no 24Hz support (by default, reprogrammable)
Automatic Input Format Detection: Digital YCbCr and RGB
Full BTB and WTW support in YPbPb output
Automatically switches color-spaces for both HDTV and SDTV
Precise black levels – no black crush in any standard mode
Dual purpose audio output connector
SPDIF digital output for 5.1 Dolby/DTS
Analog L/R 2-channel stereo
Industry-Standard Compliance
HDMI 1.4
EIA/CEA-861E
DVI 1.0
HDCP 1.1
Digital Video Input / Output
Dual integrated HDMI 1.4 cores
Supports DTV resolutions up to 1080p @ 72Hz or 720p/1080i @ 120Hz with 36-bit color depth.
Flexible digital video interface:- 24/30/36-bit RGB/YCbCr 4:4:4- 16/20/24-bit YCbCr 4:2:2- 8/10/12-bit YCbCr 4:2:2 (ITU-R BT.656)
Integrated RGB Color Space Converter for both RGB-to-YCbCr and YCbCr-to-RGB (both 601 and 709) with true 12-bit accurate data using 14-bit processing
4:2:2 <> 4:4:4 converter with 12-bit accurate data using 14-bit processing
Digital Audio Output
HDMI audio passthrough
Industry-standard S/PDIF output
Supports 2-channel 32-192kHz stereo audio
Supports IEC60958 2-channel PCM
Capable of passing IEC61937 compressed audio (5.1 Dolby® Digital, DTS, etc.)
7.1 Dolby® True HD & DTS Master Audio
Optional Accesories:
DLP-Link 3D Glasses for DLP 3D Ready 120hz Projectors/TV’s
External 60/120hz 3D Glasses with emitter for all other displays (ie. 60Hz non 3D Ready Projectors or TV’s)
Passive glasses for Dual projectors setup.
3Dfury Glasses with emitter (60/144hz) : All controls like Duty cycle, Delay, Invert, Presets are on the glasses itself, you can stay on the couch and tune up everything till perfection.

3Dfury RF Emitter Specifications:

RF Emitter with standard 3-pin mini-DIN
Work with up to 8 RF Glasses

3Dfury RF Glasses Specifications:

Most Advanced 3D Glasses
Interference Immunity
Work with all 3DTVs
Work with all non-3DTVs powered by 3Dfury
Settings are applied directly on the glasses.
Control Delay directly on the glasses.
Control Duty Cycle directly on the glasses.
Invert button directly on the glasses.
Loaded with presets selectable on the glasses.
Full Sharpness and Brightness control.
Mini USB connector for Battery (60+ hours)
IEEE 802.15.4 (ZigBee radio) Technology
Microsecond accuracy
Eliminate Ghosting
1 Year Warranty

[InfiniteStates]

Well, colour me dubious...

Cost?

[DJ-Daz]

$400 US
Then the glasses @$100

[Symonator]

Hmm dunno, is anyone intrested in 3d much?
I don't think it's taking off very well, then again HD didn't take of for ages.






Sent from Sandy Plains using psp.

[InfiniteStates]

I can live without it TBH. The price of admission is too steep ATM. Plus you need to wear glasses. And I bet the effect wears off really quick.